Number ONE game prop you should model as a beginner is a wooden crate.
Number TWO game prop you should model is a wooden barrel.
In this 4-part tutorial series you will get access to the complete process pipeline from beginning to end from modeling, UVing, texturing and exporting/importing a game ready asset into UE4.
Let's get to it...
Every artist will tell you that modeling reference is essential to creating accurate objects.
You also need to know a bit of context about your object, such as:
In my book "Preproduction Blueprint" I go more in-depth about the entire preproduction process of an environment and level design.
Wooden Barrel is a cylindrical shape. So that is what I started with.
Initial size I used:
I introduced many additional edges into the geometry so I can reshape and change the silhouette curvature.
Additional edges were also inserted and then used for adding the metal rings around the wooden barrel.
I ended up beveling many corners of the wooden barrel for extra edge. This added to the triangle count but it makes the mesh look better because it avoids a hard 90 corner that many low-poly props have.
The hard edge can be improved through normal map bake from high-poly however I didn't want to create a high-poly mesh. I wanted to introduce this geometry with a bevel. I only used one segment for the bevel.
How do you decide if you need to add bevels or not?
You should always know what the outcome of your project/asset/prop will be.
If you don't know this then you can't make a decision what to add or what to leave out.
I chose to go with a bit heavier triangle count. Low-poly was 1,504 before the addition of bevels. After I added additional detail, my triangle count jumped to 2,988
I also added a cork on the side of the barrel for additional detail along with some metal bolt straps:
After modeling is done, you are ready to UV.
UVing is often a time consuming. But if you know few techniques and tricks then it can become a quick and enjoyable process.
In fact for this wooden barrel it was very quick.
You simply select the faces to project then go to Create > Planar or Cylindrical:
Select edges where you want to make a cut then Modify > Unfold for any overlapping UVs. I use Modify > Unfold (Unfold3D) a lot. This one tool can help unwrapping objects a lot faster.
I kept the metal ring UVs separate from the wooden UVs to make it easier to texture. Anytime you have a separation of material/texture then you should also separate the UV shells.
Here is the final UV layout:
Substance Painter is a time-saver. Texturing process used to be tedious and time-consuming if you had to create all textures and masking/blending yourself.
Now with Painter or Mixer you can speed this process up to just a few hours, depending on complexity of the mesh.
Smart Materials give you a quick way to use something right away that contains many layers for you to adjust for your prop/asset.
I used 2 Smart Materials for the wooden planks, metal rings and 1 regular Material for the cork.
The key is changing Smart Materials to fit your object's needs. I went through all the layers from the Smart Material and changed color, added color variation, adjusted dirt, rust intensities etc. Go through it layer by layer.
You can enable/disable visibility of each layer to see what effect it produces.
Don't ever use Smart Materials as-is. They are good starting points but then you have to add your own unique additions to it. At the very least, change them with the layers provided.
Since I didn't model individual planks on the wooden barrel, I had to do this within the texture.
I added wooden plank detail by:
Additional Custom Dirt/Rust
I added more custom dirt and rust. This helps to introduce yoru own unique touch to the prop/asset.
For Wood Dirt I used a Generator:
For Steel Rings Rust I used a Smart Mask:
You are now ready to export your textures from Substance Painter. Go to File > Export Textures.
Export with the following settings:
Packed texture means that you will have one texture that will contain 3 textured packed into each color channel. I like using an acronym ARM (RGB) to remember which channel belongs to which texture.
Go to File > Export Selection and export your meshes from Maya for UE4 with the following settings:
On UE4 Static Mesh import I enable the following settings:
Important: after importing textures into UE4, open up the Packed texture that contains Ambient Occlusion, Roughness and Metallic. Then disable sRGB.
Create a Material and connect the textures like so:
The best way to assign the Material is through the Static Mesh editor, so the Material is assigned to all instances of the mesh. Double-Click on the Static Mesh in the Content Browser and open up Static Mesh editor:
Or you can drag-drop the Material onto each Static Mesh placed in the level.
If you want to make your mesh have physics:
Final mesh in UE4, ready to be used:
In Module 1 of "Maya Foundation Home Study Course" you'll learn how to get started with Maya. In Module 2 you will learn how to model. In Module 3 you will learn how to UV.
All content on this website is copyrighted ©2008-2023 World of Level Design LLC by Alex Galuzin. All rights reserved.
Duplication and distribution is illegal and strictly prohibited.
World of Level Design LLC is an independent company. World of Level Design website, its tutorials and products are not endorsed, sponsored or approved by any mentioned companies on this website in any way. All content is based on my own personal experimentation, experience and opinion. World of Level Design™ and 11 Day Level Design™ are trademarks of Alex Galuzin.
Template powered by w3.css